Cisco IOS XE Page 150 Configuration Manual Download

Page: 150 / 358

Configuring ISG as a RADIUS Proxy

How to Configure ISG as a RADIUS Proxy

3GPP Attribute Support

In GGSN environments ISG RADIUS proxy must understand and parse the Third Generation
Partnership Project (3GPP) attributes described in

Table 1

. These attributes form part of the accounting

requests.

Benefits of ISG RADIUS Proxy

Use of ISG RADIUS Proxy has the following benefits:

•

Allows the complete set of ISG functionality to be applied to EAP subscriber sessions.

•

Allows an ISG device to be introduced into a network with minimum disruption to the existing
network access server (NAS) and AAA servers.

•

Simplifies RADIUS server configuration because only the ISG, not every access point, must be
configured as a client.

How to Configure ISG as a RADIUS Proxy

This section contains the following procedures:

•

Initiating ISG RADIUS Proxy IP Sessions, page 5

(required)

•

Configuring ISG RADIUS Proxy Global Parameters, page 6

(required)

•

Configuring ISG RADIUS Proxy Client-Specific Parameters, page 8

(optional)

•

Defining an ISG Policy for RADIUS Proxy Events, page 10

(required)

•

Verifying ISG RADIUS Proxy Configuration, page 11

(optional)

•

Clearing ISG RADIUS Proxy Sessions, page 12

(optional)

Table 1

3GPP Attributes Supported by ISG RADIUS Proxy

Attribute

Description

Vendor ID/type

3GPP-IMSI

The International Mobile Subscriber Identity
(IMSI) for the user.

10415/1

3GPP-Charging-Id

The charging ID for this Packet Data Protocol
(PDP) context (this together with the GGSN
address constitutes a unique identifier for PDP
context).

10415/2

3GPP-SGSN-Address

The Serving GPRS Support Node (SGSN) address
that us used by the GPRS Tunneling Protocol
(GTP) control plane for handling of control
messages. It may be used to identify the Public
Line Mobile Network (PLMN) to which the user
is attached.

10415/6

Summary of Contents for IOS XE







































































































































































































































































































































































Search results

Summary of Contents for IOS XE

Reviews:

Related manuals for IOS XE

Brands by name

Popular brands

Cisco IOS XE, Configuration Manual

Search results

Summary of Contents for IOS XE

Reviews:

Related manuals for IOS XE

Brands by name

Popular brands