manualshive.com logo in svg

Cisco IOS XE, Configuration Manual, Page: 164 / 358

Share
Download
Cisco IOS XE Configuration Manual Download Page 164

Configuring ISG as a RADIUS Proxy

  Feature Information for ISG RADIUS Proxy

18

CCDE, CCENT, CCSI, Cisco Eos, Cisco HealthPresence, Cisco IronPort, the Cisco logo, Cisco Nurse Connect, Cisco Pulse, Cisco SensorBase, 
Cisco StackPower, Cisco StadiumVision, Cisco TelePresence, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, 
Flip Mino, Flipshare (Design), Flip Ultra, Flip Video, Flip Video (Design), Instant Broadband, and Welcome to the Human Network are trademarks; 
Changing the Way We Work, Live, Play, and Learn, Cisco Capital, Cisco Capital (Design), Cisco:Financed (Stylized), Cisco Store, Flip Gift Card, 
and One Million Acts of Green are service marks; and Access Registrar, Aironet, AllTouch, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, 
CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Lumin, Cisco Nexus, 
Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Continuum, EtherFast, 
EtherSwitch, Event Center, Explorer, Follow Me Browsing, GainMaker, iLYNX, IOS, iPhone, IronPort, the IronPort logo, Laser Link, LightStream, 
Linksys, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, PCNow, PIX, PowerKEY, PowerPanels, PowerTV, 
PowerTV (Design), PowerVu, Prisma, ProConnect, ROSA, SenderBase, SMARTnet, Spectrum Expert, StackWise, WebEx, and the WebEx logo are 
registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. 

All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply 
a partnership relationship between Cisco and any other company. (0910R)

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and 
figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and 
coincidental.

© 2006–2009 Cisco Systems, Inc. All rights reserved.

RADIUS Proxy Enhancements for ISG

Cisco IOS XE 
Release 2.2

This feature enables ISG to serve as a proxy between a client 
device that uses RADIUS authentication and an AAA server. 
This functionality enables ISG to be deployed in PWLAN 
and wireless mesh networks where authentication requests 
for mobile subscribers must be sent to specific RADIUS 
servers.

The following sections provide information about this 
feature:

•

Information About ISG RADIUS Proxy, page 2

•

How to Configure ISG as a RADIUS Proxy, page 4

The following commands were introduced or modified by 
this feature: aaa authorization radius-proxy, aaa server 
radius proxy, accounting method-list, accounting port, 
authentication port, clear radius-proxy client, clear 
radius-proxy session, client (ISG RADIUS proxy), debug 
radius-proxy, initiator radius-proxy, key (ISG RADIUS 
proxy), message-authenticator ignore, proxy (ISG 
RADIUS proxy), show radius-proxy client, show 
radius-proxy session, timer (ISG RADIUS proxy).

Table 2

Feature Information for ISG RADIUS Proxy

Feature Name

Releases

Feature Information

Summary of Contents for IOS XE







































































































































































































































































































































































Reviews:

No comments