Cisco IG21-EU-E-K9 Installation Manual Download

Page: 1 / 18

Cisco Systems, Inc.

www.cisco.com

IG21, IG21R and IG31R Hardware Installation

Guide

First Published:

07-16-2020

Last Updated: 01-07-2020

Organization

This guide includes the following sections:

Cautions and Warnings, page 2

Summary of relevant cautions or warnings to adhere to when installing and
using the product.

Conventions, page 2

Details on style conventions used in the guide.

Before You Begin, page 3

Provides a general overview of the IG21, IG21R and IG31R Gateways. It
also provides important site preparation and safety measures to follow
before installing the system.s

IG21, IG21R and IG31R Part Numbers, page 3

Provides a summary of the systems and part numbers.

DIN Rail Mounting Instructions for IG21, IG21R and
IG31R, page 4

Provides instructions on how to attach a DIN rail for horizontal and vertical
mounting.

Mounting the Router on a Wall Using Mounting
Brackets, page 7

Provides instructions on how to attach a mounting bracket to the IG21,
IG21R and IG31R for horizontal and vertical mounting.

Mounting the Router on a Wall Using Two KeyHoles,
page 9

Provides instructions on how to mount the router on drywall.

Summary of Contents for IG21-EU-E-K9



















Search results

Summary of Contents for IG21-EU-E-K9

Reviews:

Related manuals for IG21-EU-E-K9

Brands by name

Popular brands

Cisco IG21-EU-E-K9, Installation Manual

Search results

Summary of Contents for IG21-EU-E-K9

Reviews:

Related manuals for IG21-EU-E-K9

Brands by name

Popular brands