Provisioning set-up
(When using a provisioning system)
Start the Setup assistant
Navigate to the user name
in the upper left corner, and select
Settings
. Select
Setup assistant.
Navigate to
Provisioning
.
NOTE:
When you start up the SX10 for the first time, the Setup
assistant starts automatically.
Choose provisioning infrastructure
Choose one of the following supported provisioning systems:
• Cisco VCS (Video Communication Server)
• Cisco UCM (Unified Communications Manager)
Cisco VCS
Contact your VCS provider to get the information needed.
Have a look at the
appendix for more
information on VCS provisioning.
Cisco UCM
Contact your UCM provider to get the information needed.*
You can find more details about setting up Cisco UCM
provisioning in the
Administering TC endpoints on CUCM
guide
* The DHCP server can be set up to provide the External Manager address
automatically (DHCP Option 150). Any input set up here overrides the setting
provided by DHCP.
VCS
1. Enter IP address or DNS name of the Cisco
VCS and select
⎷
to confirm the change.
2. Enter the
Username
, and
Password
, if
required, for authenticating the video system
with the provisioning server. Select
⎷
to
confirm the change
CUCM
Enter IP address or DNS name, and select
⎷
to
confirm the change. Select
Apply
to save.
3. Enter SIP
Domain
and select
⎷
to confirm the
change.
4. Select
Apply
to confirm the changes.
D15117.01 SX10 Getting Started Guide TC7.1, MAY 2014.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
9
Cisco TelePresence SX10 Quick Set
Getting Started Guide
Configuration
Back to task overview
Contents
Introduction
Configuration
Appendices
Contact
SX10 Quick Set
