Setting the system/codec password
You need a user name and a password to sign in to the web
and command line interfaces of your system.
The video conference system is delivered with a default user
account with the user name
admin
and no password set. This
user has full access rights to the system.
A warning on the screen of your video system indicates if no
administrator password is set. To remove the warning, you
must set an administrator password.
NOTE:
We strongly recommend that you set a password for
the
admin
user to restrict access to system configuration.
Make sure to keep a copy of the password in a safe place.
You have to contact your Cisco representative, if you have
forgotten the password.
1. Open the Change Password dialog
Hover the mouse over your user name, and
choose
Change password
in the drop-down list.
2. Set the new password
Enter your current and new passwords as
requested, and click
Change password
for the
change to take effect.
If the password currently is not set, leave
the
Current password
field blank.
D15117.01 SX10 Getting Started Guide TC7.1, MAY 2014.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
16
Cisco TelePresence SX10 Quick Set
Getting Started Guide
Configuration
Back to task overview
Contents
Introduction
Configuration
Appendices
Contact
SX10 Quick Set
