manualshive.com logo in svg

Cisco CTS-SX10-K9, Getting Started Manual

Share
Download
Cisco CTS-SX10-K9 Getting Started Manual Download Page 4

D15117.01 SX10 Getting Started Guide TC7.1, MAY 2014.  

www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved. 

4

Cisco TelePresence SX10 Quick Set 

Getting Started Guide

This document goes through the basic configuration of your 

video conference system. In this guide, we also explain how 

to use the remote control and the web interface. 

You can find the information about system assembly and 

installation in the Installation guide for your product.

Products covered in this guide

•  Cisco TelePresence SX10 Quick Set

User documentation

The user documentation for the Cisco TelePresence systems 

running the TC software includes several guides suitable for 

various user groups.

• 

Installation guides:

  

How to install the products

• 

Getting started guide:

  

Initial configurations required to get the system up and 

running

• 

Administering TC Endpoints on CUCM:

 

 

Tasks to perform to start using the product with the Cisco 

Unified Communications Manager (CUCM)

• 

Administrator guide (this guide):

  

Information required to administer your product

• 

Quick reference guides:

  

How to use the product

• 

User guides:

  

How to use the product

• 

Knowledge base articles

• 

Video conferencing room primer:

  

General guidelines for room design and best practice

• 

Video conference room acoustics guidelines:

  

Things to do to improve the perceived audio quality

• 

Software release notes

• 

Regulatory compliance and safety information guide

• 

Legal & license information

Downloading the user documentation

We recommend you visit the Cisco web site regularly for 

updated versions of the user documentation. Go to: 

http://www.cisco.com/go/sx-docs

 

Guidelines how to find the documentation 

on the Cisco web site are included in the 

User documentation on the Cisco web site

 appendix.

Software

You can download the software for your product from the 

Cisco web site. Go to:

http://software.cisco.com/download/navigator.html

We recommend reading the Software Release Notes (TC7), 

go to:

http://www.cisco.com/c/en/us/support/collaboration-

endpoints/telepresence-quick-set-series/products-

release-notes-list.html

Contents

Introduction

Configuration

Appendices

Contact

SX10 Quick Set

Introduction

Summary of Contents for CTS-SX10-K9


























Reviews:

No comments

Brands by name

Popular brands

Load more brands