manualshive.com logo in svg

Cisco CTS-SX10-K9, Getting Started Manual

Share
Download
Cisco CTS-SX10-K9 Getting Started Manual Download Page 22

The System configuration menu

The settings are arranged with the following top level categories:

• 

Audio: 

Settings for microphones, audio outputs, echo control, 

volume, sounds, alerts, and more.

• 

Cameras:

 Settings for focus mode, brightness, whitebalance, 

backlight compensation, options like flip and mirror, and more.

• 

Conference:

 Conference settings like transmit and receive bit 

rates, bandwidth allocation, incoming call handling, encryption, 

packet loss resilience and far end control.

• 

FacilityService:

 Setting up speed dial buttons for facility services, 

e.g. Helpdesk.

• 

Logging:

 Set logging mode (not applicable in this software 

version).

• 

Network:

 IP, VLAN and QoS settings.

• 

NetworkServices:

 Enable/disable the network services: Multiway, 

Telnet, SSH, HTTP, HTTPS, SNMP, SIP and NTP.

• 

Phonebook Server: 

Phonebook type and location. 

• 

Provisioning:

 Settings for provisioning mode, manager address 

and protocols and methods.

• 

RTP Port Range: 

RTP port numbers.

• 

Security:

 Settings for an audit server and error logging.

• 

SerialPort:

 Enable or disable the serial port, and set its baud rate. 

• 

SIP:

 All settings for the SIP protocol.

• 

Standby: 

Configure when the system should enter standby and 

how it should behave when entering/leaving standby mode.

• 

SystemUnit:

 Settings like system name and type, and menu 

language selection.

• 

Time:

 Date and time settings.

• 

User Interface:

 On-screen display settings. 

• 

Video: 

Settings for video sources and monitors, and video display 

set-up and layout.

The System Configuration page

You can open the System Configuration page from the 

Configuration menu, and access all configuration settings. 

All settings are not available on all products; therefore the folders 

shown to the right may or may not be present on your system.

You can find a complete description of the web interface and the 

settings in the administrator guide for your system.

D15117.01 SX10 Getting Started Guide TC7.1, MAY 2014.  

www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved. 

22

Cisco TelePresence SX10 Quick Set 

Getting Started Guide

Contents

Introduction

Configuration

Appendices

Contact

SX10 Quick Set

Appendices

Summary of Contents for CTS-SX10-K9


























Reviews:

No comments

Brands by name

Popular brands

Load more brands