![Cisco Catalyst Blade 3032 Software Configuration Manual Download Page 855](http://html.mh-extra.com/html/cisco/catalyst-blade-3032/catalyst-blade-3032_software-configuration-manual_67665855.webp)
37-35
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-06
Chapter 37 Configuring QoS
Displaying Auto-QoS Information
Displaying Auto-QoS Information
To display the initial auto-QoS configuration, use the
show auto qos
[
interface
[
interface-id
]]
privileged EXEC command. To display any user changes to that configuration, use the
show
running-config
privileged EXEC command. You can compare the
show auto qos
and the
show
running-config
command output to identify the user-defined QoS settings.
To display information about the QoS configuration that might be affected by auto-QoS, use one of these
commands:
•
show mls qos
•
show mls qos maps cos-dscp
•
show mls qos interface
[
interface-id
] [
buffers
|
queueing
]
•
show mls qos maps
[
cos-dscp
|
cos-input-q
|
cos-output-q
|
dscp-cos
|
dscp-input-q
|
dscp-output-q
]
•
show mls qos input-queue
•
show running-config
For more information about these commands, see the command reference for this release.
Configuring Standard QoS
Before configuring standard QoS, you must have a thorough understanding of these items:
•
The types of applications used and the traffic patterns on your network.
•
Traffic characteristics and needs of your network. Is the traffic bursty? Do you need to reserve
bandwidth for voice and video streams?
•
Bandwidth requirements and speed of the network.
•
Location of congestion points in the network.
These sections contain this configuration information:
•
Default Standard QoS Configuration, page 37-36
•
Standard QoS Configuration Guidelines, page 37-38
•
Enabling QoS Globally, page 37-41
(required)
•
Enabling VLAN-Based QoS on Physical Ports, page 37-41
(optional)
•
Configuring Classification Using Port Trust States, page 37-42
(required
•
Configuring a QoS Policy, page 37-48
(required)
•
Configuring DSCP Maps, page 37-75
(optional, unless you need to use the
DSCP-to-DSCP-mutation map or the policed-DSCP map)
•
Configuring Ingress Queue Characteristics, page 37-81
(optional)
•
Configuring Egress Queue Characteristics, page 37-85
(optional)