43-8
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-06
Chapter 43 Configuring Enhanced Object Tracking
Configuring Enhanced Object Tracking Features
Configuring Other Tracking Characteristics
You can also use the enhanced object tracking for tracking other characteristics.
•
You can track the reachability of an IP route by using the
track ip route reachability
global
configuration command
.
•
You can use the
track ip route metric threshold
global configuration command to determine if a
route is above or below threshold.
•
You can use the
track resolution
global configuration command to change the metric resolution
default values for routing protocols.
•
You can use the
track timer
tracking configuration command to configure the tracking process to
periodically poll tracked objects.
Use the
show track
privileged EXEC command to verify enhanced object tracking configuration.
For more information about enhanced object tracking and the commands used to configure it.
Configuring IP SLAs Object Tracking
Cisco IOS IP Service Level Agreements (IP SLAs) is a network performance measurement and
diagnostics tool that uses active monitoring by generating traffic to measure network performance. Cisco
IP SLAs operations collects real-time metrics that you can use for network troubleshooting, design, and
analysis.
For more information about Cisco IP SLAs on the switch, see
Chapter 42, “Configuring Cisco IOS IP
SLAs Operations.”
For IP SLAs command information see the
Cisco IOS IP SLAs Command Reference,
Release 12.4T.
Step 6
standby
[
group-number
]
track
object-number
[
decrement
[
priority-decrement
]]
Configure HSRP to track an object and change the hot standby priority based
on the state of the object.
•
(Optional)
group-number
—Enter the group number to which the
tracking applies.
•
object-number
—Enter a number representing the object to be tracked.
The range is from 1 to 500; the default is 1.
•
(Optional)
decrement
priority-decrement
—Specify the amount by
which the hot standby priority for the router is decremented (or
incremented) when the tracked object goes down (or comes back up).
The range is from 1 to 255; the default is 10.
Step 7
end
Return to privileged EXEC mode.
Step 8
show standby
Verify the standby router IP address and tracking states.
Step 9
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Command
Purpose
