46-19
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-06
Chapter 46 Configuring MSDP
Monitoring and Maintaining MSDP
To prevent the RP address from being derived in this way, use the
no
ip msdp originator-id
interface-id
global configuration command.
Monitoring and Maintaining MSDP
To monitor MSDP SA messages, peers, state, or peer status, use one or more of the privileged EXEC
commands in
Table 46-1
:
To clear MSDP connections, statistics, or SA cache entries, use the privileged EXEC commands in
Table 46-2
:
Table 46-1
Commands for Monitoring and Maintaining MSDP
Command
Purpose
debug ip msdp
[
peer-address
|
name
] [
detail
] [
routes
]
Debugs an MSDP activity.
debug ip msdp resets
Debugs MSDP peer reset reasons.
show ip msdp count
[
autonomous-system-number
]
Displays the number of sources and groups originated in SA
messages from each autonomous system. The
ip msdp
cache-sa-state
command must be configured for this command to
produce any output.
show ip msdp peer
[
peer-address
|
name
]
Displays detailed information about an MSDP peer.
show ip msdp sa-cache
[
group-address
|
source-address
|
group-name
|
source-name
] [
autonomous-system-number
]
Displays (S,G) state learned from MSDP peers.
show ip msdp summary
Displays MSDP peer status and SA message counts.
Table 46-2
Commands for Clearing MSDP Connections, Statistics, or SA Cache Entries
Command
Purpose
clear ip msdp peer
peer-address
|
name
Clears the TCP connection to the specified MSDP peer, resetting all
MSDP message counters.
clear ip msdp statistics
[
peer-address
|
name
]
Clears statistics counters for one or all the MSDP peers without resetting
the sessions.
clear ip msdp sa-cache
[
group-address
|
name
]
Clears the SA cache entries for all entries, all sources for a specific group,
or all entries for a specific source/group pair.
