1-2
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-06
Chapter 1 Overview
Features
•
IP services feature set, which provides a richer set of enterprise-class intelligent services and full
IPv6 support. It includes all IP base features plus full Layer 3 routing (IP unicast routing, IP
multicast routing, and fallback bridging). The IP services feature set includes protocols such as the
Enhanced Interior Gateway Routing Protocol (EIGRP) and the Open Shortest Path First (OSPF)
Protocol. This feature set also supports all IP service features with IPv6 routing and IPv6 ACLs and
Multicast Listener Discovery (MLD) snooping.
IP services-only Layer 3 features are described in the
“Layer 3 Features” section on page 1-14
.
For more information, see
Chapter 25, “Configuring IPv6 MLD Snooping,”
and
Chapter 36,
“Configuring IPv6 ACLs.”
For more information on IPv6 routing, see
Chapter 40, “Configuring IPv6 Unicast Routing.”
For more information about IPv6 ACLs, see
Chapter 36, “Configuring IPv6 ACLs.”
Note
Unless otherwise noted, all features described in this chapter and in this guide are supported on
both the IP base and IP services feature sets.
The switch has these features:
•
Deployment Features, page 1-3
•
Performance Features, page 1-4
•
Management Options, page 1-5
•
Manageability Features, page 1-6
(includes a feature requiring the cryptographic universal software
image)
•
Availability and Redundancy Features, page 1-8
•
VLAN Features, page 1-9
•
Security Features, page 1-10
(includes a feature requiring the cryptographic universal software
image)
•
QoS and CoS Features, page 1-13
•
Layer 3 Features, page 1-14
(includes features requiring the IP services feature set)
•
Monitoring Features, page 1-15
