Cisco ASR 1001 Software Configuration Manual Download Page 348

Page: 348 / 378

B-4

Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide

OL-16506-10

Appendix B Configuration Examples

Configuring the Router to Boot the Consolidated Package on the TFTP Server

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

[email protected].

cisco ASR1006 (RP1) processor with 1772131K/6147K bytes of memory.

5 Gigabit Ethernet interfaces

2 Packet over SONET interfaces

2 Channelized T3 ports

32768K bytes of non-volatile configuration memory.

4194304K bytes of physical memory.

921599K bytes of eUSB flash at bootflash:.

39004543K bytes of SATA hard disk at harddisk:.

Duplex is configured.Remove duplex configuration before enabling auto-negotiation

User Access Verification

Username: user

Password:

Router>en

Password:

Router#

show version

Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version

12.2(33)XNA, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Thu 01-May-08 00:29 by mcpre

licensed under the GNU General Public License ("GPL") Version 2.0. The

software code licensed under GPL Version 2.0 is free software that comes

with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such

GPL code under the terms of GPL Version 2.0. For more details, see the

documentation or "License Notice" file accompanying the IOS-XE software,

or the applicable URL provided on the flyer accompanying the IOS-XE

software.

ROM: IOS-XE ROMMON

Router uptime is 2 minutes

Uptime for this control processor is 4 minutes

System returned to ROM by reload at 14:52:01 DST Thu May 29 2008

System image file is "tftp://172.17.16.81/auto/tftp-users/user/asr1000rp1-adve"

Last reload reason: Reload command

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

Summary of Contents for ASR 1001



























































































































































































































































































































































































Search results

Summary of Contents for ASR 1001

Reviews:

Related manuals for ASR 1001

Brands by name

Popular brands

Cisco ASR 1001, Software Configuration Manual

Search results

Summary of Contents for ASR 1001

Reviews:

Related manuals for ASR 1001

Brands by name

Popular brands