Cisco ASR 1001 Software Configuration Manual Download Page 370

Page: 370 / 378

B-26

Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide

OL-16506-10

Appendix B Configuration Examples

ISSU—Consolidated Package Upgrade

*Jul 22 00:10:45.488: %HA_CONFIG_SYNC-6-BULK_CFGSYNC_SUCCEED: Bulk Sync succeeded

*Jul 22 00:10:45.489: %RF-5-RF_TERMINAL_STATE: Terminal state reached for (SSO)

--- Starting installation changes ---

Cancelling rollback timer

Saving image changes

Finished installation changes

Building configuration...

[OK]

SUCCESS: version committed: bootflash:asr1000rp1-adventerprisek9.02.01.01.122-33.XNA1.bin

Router#

show version

Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version

12.2(33)XNA1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Tue 08-Jul-08 14:40 by mcpre

licensed under the GNU General Public License ("GPL") Version 2.0. The

software code licensed under GPL Version 2.0 is free software that comes

with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such

GPL code under the terms of GPL Version 2.0. For more details, see the

documentation or "License Notice" file accompanying the IOS-XE software,

or the applicable URL provided on the flyer accompanying the IOS-XE

software.

ROM: IOS-XE ROMMON

Router uptime is 2 weeks, 3 hours, 33 minutes

Uptime for this control processor is 16 minutes

System returned to ROM by reload at 15:24:15 DST Mon Jul 21 2008

System image file is "bootflash:asr1000rp1-adventerprisek9.02.01.01.122-33.XNA1.bin"

Last reload reason: EHSA standby down

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

[email protected].

cisco ASR1006 (RP1) processor with 1772046K/6147K bytes of memory.

8 FastEthernet interfaces

5 Gigabit Ethernet interfaces

8 Serial interfaces

8 Channelized T1 ports

2 Packet over SONET interfaces

2 Channelized T3 ports

32768K bytes of non-volatile configuration memory.

Summary of Contents for ASR 1001



























































































































































































































































































































































































Search results

Summary of Contents for ASR 1001

Reviews:

Related manuals for ASR 1001

Brands by name

Popular brands

Cisco ASR 1001, Software Configuration Manual

Search results

Summary of Contents for ASR 1001

Reviews:

Related manuals for ASR 1001

Brands by name

Popular brands