7-8
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-10
Chapter 7 Configuring Call Home
How to Configure Call Home
7.
destination message-size
bytes
8.
active
9.
exit
10.
end
DETAILED STEPS
Command or Action
Purpose
Step 1
configure terminal
Example:
Router#
configure terminal
Enters global configuration mode.
Step 2
call
-
home
Example:
Router(config)#
call-home
Enters call home configuration mode.
Step 3
profile
name
Example:
Router(config-call-home)#
profile profile1
Enters call home destination profile configuration mode for
the specified destination profile name. If the specified
destination profile does not exist, it is created.
Step 4
destination transport-method email
Example:
Router(cfg-call-home-profile)#
destination
transport-method email
(Optional) Configures the message transport method for
email. This is the default.
Step 5
destination address email
email-address
Example:
Router(cfg-call-home-profile)#
destination
address email [email protected]
(Required) Configures the destination e-mail address to
which Call Home messages are sent.
Step 6
destination preferred-msg-format
{
long-text
|
short-text
|
xml
}
Example:
Router(cfg-call-home-profile)#
destination
preferred-msg-format xml
(Optional) Configures a preferred message format. The
default is XML.
Step 7
destination message-size
bytes
Example:
Router(cfg-call-home-profile)#
destination
message-size 3145728
(Optional) Configures a maximum destination message size
(from 50 to 3145728 bytes) for the destination profile. The
default is 3145728 bytes.
Step 8
active
Example:
Router(cfg-call-home-profile)#
active
(Optional) Enables the destination profile. By default, a
user-defined profile is enabled when it is created.
