Cisco ASR 1001 Software Configuration Manual Download Page 145

Page: 145 / 378

4-83

Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide

OL-16506-10

Chapter 4 Software Upgrade Process

Upgrade Process With Service Impact for Nonredundant Platforms

Examples

The following example shows the software upgrade for Cisco ASR 1001 Router running subpackages.

Router#

show version

Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Experimental

Version 15.1(20110301:124851) [asr1001-universalk9.03.02.01.S.151-1.S1]

Compiled Tue 01-Mar-11 06:25 by mcpre

licensed under the GNU General Public License ("GPL") Version 2.0. The

software code licensed under GPL Version 2.0 is free software that comes

with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such

GPL code under the terms of GPL Version 2.0. For more details, see the

documentation or "License Notice" file accompanying the IOS-XE software,

or the applicable URL provided on the flyer accompanying the IOS-XE

software.

Step 15

issu loadversion rp 0 file

file-system

:asr1001-{rpbase,sipbase,sipspa,espbase}*

ersion

*.pkg force

Example:

Router#

issu loadversion rp 0 file

bootflash:221subs/asr1001-{rpbase,sipbase,sipspa,es

pbase}*03.02.01.S.151-1.S1_2.pkg force

Upgrade the RP, SIP, SPA, and ESP subpackages for
each SIP on the router.

Note

This step must be completed one SIP at a time,
and repeated for each SIP installed on the router
before performing the next step.

Tip

You can use the

show ip interface brief

command to identify which slots contain SIPs
and SPAs. The interfaces with three numbers (in
the form

SIP-number

SPA-number

interface-number

)

identify the SIP and SPA locations in the router.

Note

The

pattern

options used in this CLI (

rpbase

sipbase

sipspa,

and

espbase

) were introduced

in Cisco IOS XE Release 2.1.2 and are not
available in previous Cisco IOS XE Releases.

See the

“ISSU Procedures (Prior to Cisco IOS

XE Release 2.1.2)” section on page 4-73

for

pre-Cisco IOS XE Release 2.1.2 ISSU upgrade
procedures.

Step 16

show version installed

Example:

Router#

show version installed

(Optional) Verify that the subpackages are properly
installed.

Step 17

reload

Example:

Router#

reload

(Optional) Reload the RP.

Tip

The router will continue normal operation even
without a reload, so you can reload the router
during scheduled maintenance or a slower
traffic period. It is highly recommended reload
to avoid conflicts in the software base.

Command or Action

Purpose

Summary of Contents for ASR 1001



























































































































































































































































































































































































Search results

Summary of Contents for ASR 1001

Reviews:

Related manuals for ASR 1001

Brands by name

Popular brands

Cisco ASR 1001, Software Configuration Manual

Search results

Summary of Contents for ASR 1001

Reviews:

Related manuals for ASR 1001

Brands by name

Popular brands