S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-55
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
BGP Messages
Error Message
BGP-3-NOMEMORY Format: Could not allocate %s
Explanation
The system may be low on memory.
Parameters: Data Type ...
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
BGP-3-NONBESTPATH Format: [%s] Non bestpath in attr. path chain for
%s/%d
Explanation
An internal software error occurred.
Parameters: Address-family, Prefix/masklength ...
Recommended Action
Use the 'restart' command to restart the feature and clear this problem.
Error Message
BGP-3-PATH_DEL Format: Failed to destroy path (%s), error %d
Explanation
The BGP process may have run out of memory.
Parameters: Path Type, Error ...
Recommended Action
If BGP ran out of memory, add memory to the router or change the network
configuration to decrease memory requirements. Clear any BGP peers that may have been shut down
automatically. If BGP has available memory, restart BGP.
Error Message
BGP-3-PATH_STALE Format: [%s] %s path being %s, for %s/%d from peer
%s, should not be stale
Explanation
An internal software error occurred.
Parameters: Address-family, Path State, Operation, Prefix/masklength, Peer address ...
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
BGP-3-PEER Format: Peer %s, failed %s
Explanation
An internal software error occurred.
Parameters: Peer address, Operation ...
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
BGP-3-PFX_NOMEM Format: Could not allocate %s for %s/%d
Explanation
The system may be low on memory.
Parameters: Data Type, Prefix/masklength ...
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.