S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-554
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
RADIUS Messages
Error Message
QOS-6-PSS_CREATED: [chars] PSS Created
Explanation
One of the persistent information database of the QoS Manager has been recreated.
Recommended Action
No action is required.
Error Message
QOS-6-PSS_DESTROYED: [chars] PSS Destroyed
Explanation
One of the persistent information databases of the QoS Manager has been intentionally
destroyed and would be recreated.
Recommended Action
No action is required.
Error Message
QOS-6-SERVICE_UP: Initialized [chars]
Explanation
The QoS Manager is up and ready to accept client requests The service was initialized
in [char] mode.
Recommended Action
No action is required.
Error Message
QOS-6-SWITCHOVER: Switching Over to other Supervisor.
Explanation
The QoS Manager has successfully switched over to the standby supervisor module.
Recommended Action
No action is required.
Error Message
QOS-6-UNKNOWNMTS: QoS Manager received an unexpected message
Explanation
QoS Manager received an unexpected message.
Recommended Action
No action is required.
RADIUS Messages
This section contains the RADIUS messages.
RADIUS-2
Error Message
RADIUS-2-RADIUS_NO_AUTHEN_INFO: ASCII authentication not supported
Explanation
ASCII authentication not supported.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.