S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-49
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
BGP Messages
Error Message
BGP-3-ASSERT Format: %s:%d: Assertion `%s' failed.
Explanation
An internal software error occurred.
Parameters: File Name, Line Number, Assert Type ...
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
BGP-3-ATTRAVL_OP Format: Failed attribute external database
operation: %s, id %lu
Explanation
BGP was unable to perform an attribute external database operation
Parameters: Operation, Attr ID ...
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
BGP-3-ATTRID_OP Format: Failed to %s attribute ID
Explanation
BGP was unable to allocate or free an index for a BGP PATH attribute block
Parameters: Allocate or free ...
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
BGP-3-BADPEERAS Format: VRF %s, Peer %s - bad remote-as, expecting %s
received %s.
Explanation
The system has detected an error when prepending to an AS path.
Parameters: Segment Type, Segment Length ...
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
BGP-3-BRIB_ADD_INT Format: Internal error in adding to BRIB: %s
Explanation
An internal error has occurred when the system attempted to a path to the BRIB. The
BGP process may have run out of memory.
Parameters: Error ...
Recommended Action
If BGP ran out of memory, add memory to the router or change the network
configuration to decrease memory requirements. Clear any BGP peers that may have been shut down
automatically. If BGP has available memory, restart BGP.
