S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-679
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SYSMGR Messages
Error Message
SYSMGR-2-HASWITCHOVER_PRE_START: This supervisor is becoming active
(pre-start phase).
Explanation
A cold switchover has started (pre-start phase).
Recommended Action
When the other supervisor is back online, use the command 'show system
reset-reason' to know what caused the switchover.
Error Message
SYSMGR-2-HASWITCHOVER_START: This supervisor is becoming active.
Explanation
A cold switchover has started.
Recommended Action
When the other supervisor is back online, use the command 'show system
reset-reason' to know what caused the switchover.
Error Message
SYSMGR-2-HEARTBEAT_FAILED: Sysmgr heartbeat failed at %lu. [chars].
[chars] ([dec])
Explanation
The system manager had failure while trying to heartbeat with KLM.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-2-HEARTBEAT_FAILURE: Service [chars] sent SIGABRT for not
setting heartbeat for last [dec] periods.
Explanation
A service is not setting proper heartbeats to The system Manager So it will kill this
service and if this service has restartability set to TRUE, the service will restart.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-2-INBAND_START_FAILED: Failure while bringing up inband after
ISSU reboot, errno: [dec].
Explanation
Sysmgr tried to bring up inband after ISSU reboot, but the call has detected an error.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-2-INVALID_HANDSHAKE: Invalid secret ([dec]) received from
service [chars]. Expected [dec].
Explanation
A service cannot be started.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.