S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-712
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SYSMGR Messages
Error Message
SYSMGR-5-STATEFUL_STATE: System Manager is in state [chars] after
stateful restart.
Explanation
The system Manager has been restarted stateful after an error that resulted in The
system Manager exiting.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-5-SUBPROC_KILLED: [chars] (PID [dec]) hasn't caught signal
[dec][chars]
Explanation
This message is for Cisco TAC debugging. This is not a problem or malfunction.
Recommended Action
No action is required.
Error Message
SYSMGR-5-SUBPROC_TERMINATED: [chars] (PID [dec]) has finished with
error code [chars] ([dec]).
Explanation
This message is for Cisco TAC debugging. This is not a problem or malfunction.
Recommended Action
No action is required.
Error Message
SYSMGR-5-UGRP_COMPLETED: Upgrade completed for group [dec].
Explanation
This is a legacy message that can be igored from Cisco MDS SAN-OS release 1.3(4a).
Recommended Action
No action is required.
SYSMGR-6
Error Message
SYSMGR-6-ALL_SCOPES_STARTED: System services have completely started
at this time.
Explanation
The system services have completely started at this time.
Recommended Action
No action is required.
Error Message
SYSMGR-6-HANDSHAKE_DONE: Handshake with service [chars] successfully
performed.
Explanation
This message is for Cisco TAC debugging. This is not a problem or malfunction.
Recommended Action
No action is required.
