S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-71
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
CALLHOME Messages
BOOTVAR-6
Error Message
BOOTVAR-6-ALREADY_IN_SYNC: Image already in sync
Explanation
This message indicates that you do not need to update the image on the standby
supervisor module.
Recommended Action
No action is required.
Error Message
BOOTVAR-6-CONFIG_UPDATED: Boot configuration updated
Explanation
The boot-loader configuration files have been successfully updated.
Recommended Action
No action is required.
Error Message
BOOTVAR-6-STARTING: Boot configuration initialized
Explanation
The service has successfully started.
Recommended Action
No action is required.
CALLHOME Messages
This section contains the CALLHOME messages.
CALLHOME-2
Error Message
CALLHOME-2-EVENT: [chars]
Explanation
A Call Home event [chars] occurred.
Recommended Action
If you have configured your e-mail address to receive Call Home notifications,
check your e-mail for more details about this Call Home event. If Call Home was not enabled,
execute commands relevant to the callhome event to get more information about the error.
Error Message
CALLHOME-2-PROGRAM_EXIT: callhome process ending: [chars]
Explanation
A Call Home process is exiting with the reason [chars].
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
