S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-28
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ARP Messages
Error Message
ARP-2-API_INIT Format: Failed to initialize %s API
Explanation
An unrecoverable software error has occurred during ARP initialization.
Recommended Action
Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message
ARP-2-CLI_INIT Format: Failed to initialize CLI
Explanation
An unrecoverable software error has occurred during ARP initialization.
Recommended Action
Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message
ARP-2-DUP_SRC_IP Format: Source address of packet received from %s on
%s(%s) is duplicate of local, %s
Explanation
There may be another router on this network that is configured with the same IP
address.
Recommended Action
Check all routers on the interface for a misconfiguration.
Error Message
ARP-2-DUP_SRCIP Format: Source address of packet received from %s on
%s is duplicate of local, %s
Explanation
There may be another router on this network that is configured with the same IP
address.
Recommended Action
Check all routers on the interface for a misconfiguration.
Error Message
ARP-2-INIT_FAIL Format: Initialization failure
Explanation
An unrecoverable software error has occurred during ARP initialization.
Recommended Action
Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message
ARP-2-MQ_OPEN Format: Failed to open message queue %s: %s
Explanation
An unrecoverable software error has occurred during ARP initialization.
Recommended Action
Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message
ARP-2-MQ_RECV Format: Message queue receive failed on %s queue: %s
Explanation
An unexpected fatal error has occurred.
Recommended Action
Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
