S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-504
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PORT Messages
Error Message
PORT-3-IF_TRANSCEIVER_READ_ERROR: Transceiver read error for
interface [chars]
Explanation
Transceiver eeprom read failed.
Recommended Action
Remove and insert the SFP back again. If the problem persists check if the
transceiver is supported using the command: show interface transceiver. Contact customer support
to resolve the condition.
Error Message
PORT-3-IF_UNSUPPORTED_TRANSCEIVER: Transceiver for interface [chars]
is not supported
Explanation
Transceiver is not from an authorized vendor.
Recommended Action
This command will determine the transceiver being used: show interface
transceiver. Contact customer support for a list of authorized transceiver vendors.
PORT-4
Error Message
PORT-4-IF_PORT_SECURITY_VIOLATION: Interface [chars] encountered port
security violation
Explanation
The port has detected a port security violation.
Recommended Action
Check the port security configurations on interface.
Error Message
PORT-4-IF_SFP_CLK_RATE_ERROR: SFP clock rate error for interface
[chars]
Explanation
The SFP clock rate has a mismatch or has failed.
Recommended Action
Remove the SFP and insert a new one with a different frequency type. If the
problem persists check if the transceiver is supported using the command: show interface
transceiver. Contact customer support to resolve the condition.
Error Message
PORT-4-IF_SFP_WARNING: Interface [chars], [chars]
Explanation
There was a warning on the transceiver module.
Recommended Action
Enter the show interface transceiver details command to obtain more
information.
Error Message
PORT-4-IF_TRUSTSEC_VIOLATION: Interface [chars] encountered port
security violation
Explanation
The port has detected a port security violation.
Recommended Action
Check the port security configurations on interface.
