background image

 

xxi

Cisco Unified IP Video Phone 7985G Administration Guide 

OL-8726-02

Preface

Document Conventions

Note

Means 

reader take note

. Notes contain helpful suggestions or references to 

material not covered in the publication.

Caution

Means 

reader be careful

. In this situation, you might do something that could 

result in equipment damage or loss of data.

string

A nonquoted set of characters. Do not use quotation marks around the string 
or the string will include the quotation marks.

screen

 font

Terminal sessions and information the system displays are in 

screen

 font.

boldface screen

 font

Information you must enter is in 

boldface screen

 font.

italic screen

 font

Arguments for which you supply values are in 

italic screen

 font.

^

The symbol ^ represents the key labeled Control—for example, the key 
combination ^D in a screen display means hold down the Control key while 
you press the D key.

<   >

Nonprinting characters, such as passwords are in angle brackets.

Convention

Description

Summary of Contents for 7985G - IP Phone NTSC Video





















































































































































Reviews: