background image

 

xvi

Cisco Unified IP Video Phone 7985G Administration Guide 

OL-8726-02

Preface

Cisco Product Security Overview

Cisco Product Security Overview

Cisco provides a free online Security Vulnerability Policy portal at this URL:

http://www.cisco.com/en/US/products/products_security_vulnerability_policy.ht
ml

From this site, you can perform these tasks:

  •

Report security vulnerabilities in Cisco products.

  •

Obtain assistance with security incidents that involve Cisco products.

  •

Register to receive security information from Cisco.

A current list of security advisories and notices for Cisco products is available at 
this URL:

http://www.cisco.com/go/psirt

If you prefer to see advisories and notices as they are updated in real time, you 
can access a Product Security Incident Response Team Really Simple Syndication 
(PSIRT RSS) feed from this URL:

http://www.cisco.com/en/US/products/products_psirt_rss_feed.html

Reporting Security Problems in Cisco Products

Cisco is committed to delivering secure products. We test our products internally 
before we release them, and we strive to correct all vulnerabilities quickly. If you 
think that you might have identified a vulnerability in a Cisco product, contact 
PSIRT:

  •

Emergencies — 

[email protected]

  •

Nonemergencies — 

[email protected]

Tip

We encourage you to use Pretty Good Privacy (PGP) or a compatible product to 
encrypt any sensitive information that you send to Cisco. PSIRT can work from 
encrypted information that is compatible with PGP versions 2.

x

 through 8.

x

Summary of Contents for 7985G - IP Phone NTSC Video





















































































































































Reviews: