Chapter 3 Placing a Call and Other Basic Phone Tasks
Using Speed Dial
3-12
Cisco IP Phone 7960 and 7940 Series User Guide
78-10182-08
Procedure
Step 1
Press any available line button.
Step 2
Press the GPickUp softkey.
Step 3
Dial the required call pickup group number.
Step 4
Answer the incoming call that is redirected to your phone.
Step 5
To pick up a call using a different call pickup group number, hang up and begin
again at Step 1.
Tip
If there is more than one incoming call involved when you activate group call
pickup, you receive the first unanswered call. If there is no unanswered call in the
group, or if you dial an invalid group number, you receive a fast busy tone.
Related Topics
•
Storing and Retrieving a Call Using Call Park, page 3-9
•
How to Pick Up Calls Within Your Group, page 3-11
Using Speed Dial
The buttons to the right of the LCD screen on your Cisco IP Phone can be used as
phone lines or as speed dial buttons, as determined by your system administrator.
You can assign phone numbers and text labels to speed dial buttons using the
Cisco CallManager User Options web pages.
Unlike the Fast Dial feature (see the
“Using Fast Dials” section on page 5-12
),
Speed Dial does not require subscribing to or using a service.
Note
If you are using one or more Cisco IP Phone 7914 Expansion Modules, you can
access extra speed dial or line buttons. To configure speed dial buttons for your
Expansion Module, follow the steps in the procedure below.
