Cisco 7960 - IP Phone - Telephone User Manual Download Page 44 | Manualshive

Page: 44 / 124

background image

Chapter 2 Customizing Phone Settings

Adjusting the Ringer Volume

2-2

Cisco IP Phone 7960 and 7940 Series User Guide

78-10182-08

Note

If you press the Volume button when none of these are in use, you are
adjusting the ringer volume. For details, see the

“Adjusting the Ringer

Volume” section on page 2-2

.

Step 2

To save this volume setting for future calls, press the Save softkey.

If you adjust the volume during a call without pressing Save, you are changing the
volume level only for the duration of that particular call; on subsequent calls, the
volume level will revert to the previously saved setting.

Related Topics

•

Adjusting the Ringer Volume, page 2-2

•

Personalizing the Ringer Sound, page 2-3

•

Changing the LCD Screen Contrast, page 2-5

Adjusting the Ringer Volume

To change the volume used by the ringer, press the up or down Volume button
while the handset is in its cradle. Continue to press the Volume button to hear
sample rings and to adjust the volume to the desired level. The ringer volume is
automatically saved.

Related Topics

•

Adjusting the Handset, Speakerphone, and Headset Volume, page 2-1

•

Personalizing the Ringer Sound, page 2-3

•

Changing the LCD Screen Contrast, page 2-5

«
...
42
43
44
45
46
...
»

Summary of Contents for 7960 - IP Phone - Telephone





























































































































Reviews:

No comments

Related manuals for 7960 - IP Phone - Telephone

Brand: Yealink Pages: 6

Brand: YAKOYA Pages: 62

Brand: Sagem Pages: 72

Brand: Sagem Pages: 63

Brand: Sagem Pages: 77

Brand: Olitech Pages: 12

Brand: Archos Pages: 115

Brand: Serioux Pages: 24

Vigilantplant SMARTDAC+ Series

Brand: YOKOGAWA Pages: 31

Brand: Ulefone Pages: 47

Brand: Blu Pages: 36

Brand: Sony Ericsson Pages: 87

Telenium IP IP7008D

Brand: Vodavi Pages: 2

Brand: RugGear Pages: 31

Brand: snopfon Pages: 46

Brand: Xorcom Pages: 2

MultiPhone PAP4505DUO

Brand: Prestigio Pages: 4

Brand: LG Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands