Cisco 7960 - IP Phone - Telephone User Manual Download Page 86

Page: 86 / 124

Chapter 5 Managing Your Contacts

Managing Your Personal Address Book

5-6

Cisco IP Phone 7960 and 7940 Series User Guide

78-10182-08

•

Searching Personal Address Book Entries on Your Phone, page 5-6

•

Editing a Personal Address Book Entry on Your Phone, page 5-7

•

Deleting an Address Book Entry on the Web, page 5-8

•

Managing Your Personal Address Book, page 5-2

Searching Personal Address Book Entries on Your Phone

Use the following procedure to find a personal address book entry.

Procedure

Step 1

Press the services button.

The phone displays the services that have been configured for your phone.

Step 2

Use the navigation button to highlight the option that corresponds to the My
Address Book service and press the Select softkey.

Tip

The exact service name may vary, depending on how your system
administrator configured the service.

Step 3

Perform one of the following actions:

•

To display a specific name, enter the name using your phone keypad and press
the Submit softkey. All names that match your search criteria will display.

•

To display all your address book entries, press the Submit softkey.

Step 4

Using the navigation button, highlight the entry that you want and press the Select
softkey.

Related Topics

•

Creating a New Address Book Entry on the Web, page 5-4

•

Searching for or Editing a Personal Address Book Entry on the Web, page 5-5

•

Subscribing to Personal Address Book, page 5-2

•

Editing a Personal Address Book Entry on Your Phone, page 5-7

Summary of Contents for 7960 - IP Phone - Telephone





























































































































Search results

Summary of Contents for 7960 - IP Phone - Telephone

Reviews:

Related manuals for 7960 - IP Phone - Telephone

Brands by name

Popular brands

Cisco 7960 - IP Phone - Telephone, User Manual

Search results

Summary of Contents for 7960 - IP Phone - Telephone

Reviews:

Related manuals for 7960 - IP Phone - Telephone

Brands by name

Popular brands