Chapter 3 Setting Up Cisco Wireless IP Phones
Configuring IP Phones in Cisco CallManager
3-12
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
OL-7104-01
previously configured as Cisco IP Phone 7960s, you will must remove those
entries from the Cisco CallManager database and assign the Cisco 7920 phone
type to these phones. See the
“Re-registering the Phone Using the Cisco 7920
Phone Type” section on page 3-12
for details.
If you used auto-registration to register the Cisco Wireless IP Phone 7920 with
Cisco CallManager 3.3 released prior to 3.3(3) SR1, you must make the
configuration files on the phone available to the Cisco CallManager so the phone
can be registered with the Cisco 7920 phone type. See the
“Using
Auto-Registration Prior to Release 3.3(3)SR1” section on page 3-8
for details.
Re-registering the Phone Using the Cisco 7920 Phone Type
When you upgrade to Cisco CallManager version 3.3(3) SR1 and later, you might
have Cisco Wireless IP Phone 7920s that were previously configured as
Cisco IP Phone 7960s. If this is the case, you must remove those phones from the
Cisco CallManager database and assign the Cisco 7920 phone type to the
Cisco Wireless IP Phone 7920 as follows.
To perform this task, follow these steps:
Procedure
Step 1
Log in to the Cisco CallManager Administration application.
Step 2
From the menu bar, choose
System > Cisco CallManager
.
The Cisco CallManager Configuration window displays.
Step 3
Choose
Device > Phones
.
Step 4
Choose the records that match your Cisco Wireless IP Phone 7920s.
Step 5
Click
Delete
to delete the records.
All Cisco Wireless IP Phone 7920s will be deleted from the Cisco CallManager
database.
Step 6
In the Cisco CallManager Configuration window, choose
Device > Add a New
Device
.
The Add a New Device window displays.
Step 7
Select
Phone
from the Device Type drop-down menu and click
Next
.
The Add a New Phone window displays.
Summary of Contents for 7920 - Unified Wireless IP Phone VoIP
Page 4: ......
