Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual Download Page 116

Page: 116 / 238

Chapter 4 Using the Cisco 7920 Configuration Utility

Overview of the Application Windows

4-30

Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1

OL-7104-01

For example, you can choose the Normal profile and change the Warning Tone
from Tone to Vibrate.

Modifying Personal Profiles

To modify the default settings for a personal profile, follow these steps:

Procedure

Step 1

Click the

Phone Settings

tab.

Step 2

Click the button for the profile that you want to modify. The default or current
Mode settings appear for that profile

Step 3

In the

Speaker Volume

field, click the slider and move right to adjust the volume

higher or move left to adjust the volume lower.

Step 4

In the

Ring Volume

field, click the slider and move right to adjust the volume

higher or move left to adjust the volume lower.

Step 5

In the

Incoming Call Alert

field, click On or Off to enable or disable the alerting

option. When disabled, the phone does not ring or vibrate.

Step 6

In the

Vibrating Call Alert

field, click On or Off to enable or disable the

vibrating option. You can have both the ring and vibration enabled for call alert.

Step 7

In the

Keypad Tones

field, click On or Off to enable or disable the a tone when

pressing keys on the keypad.

Step 8

In the

Warning Style

field, choose one of the following options to warn you when

the battery power is low, the RF signal strength is low, or you received a voice
message.

•

Tone—Sends a short tone

•

Vibration—Sends a short vibration

•

Off—Disable the warning option.

Related Topics

•

Configuring a Network Profile, page 4-18

•

Configuring Phone Settings, page 4-25

•

Configuring the Phone Book, page 4-33

Summary of Contents for 7920 - Unified Wireless IP Phone VoIP















































































































































































































































Search results

Summary of Contents for 7920 - Unified Wireless IP Phone VoIP

Reviews:

Related manuals for 7920 - Unified Wireless IP Phone VoIP

Brands by name

Popular brands

Cisco 7920 - Unified Wireless IP Phone VoIP, Administration Manual

Search results

Summary of Contents for 7920 - Unified Wireless IP Phone VoIP

Reviews:

Related manuals for 7920 - Unified Wireless IP Phone VoIP

Brands by name

Popular brands