Chapter 5 Configuring Network Profiles on the Cisco Wireless IP Phone 7920
Configuring Wireless Settings for the Profile
5-16
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
OL-7104-01
To select the authentication type for the profile, follow these steps:
Procedure
Step 1
Choose
Menu
>
Profiles
>
Network Profile.
Step 2
Scroll to and select the profile that you want to change.
Step 3
Scroll to and select
802.11b Configuration
.
Step 4
Scroll to
Authentication
and press
Select
.
The Authentication options display.
Step 5
Scroll to one of these options and press
Select
.
•
AKM
•
Open
•
Shared Key
•
LEAP
A check appears by the selected authentication type.
Note
You need to enable WEP Key encryption before you choose the Shared Key
authentication type. Otherwise, an “Enable WEP Key first!” message appears.
Related Topics
•
Setting Up the Wired Equivalent Privacy (WEP) Keys
•
Setting Up the Service Set Identifier (SSID)
•
Applying Changes to Wireless Settings and Network Profiles
Setting the Cisco Light Extensible Authentication Protocol (LEAP)
When your network uses Cisco LEAP or AKM for user authentication, you must
configure both the user name and a password on the Access Control Server (ACS)
and the phone.
Summary of Contents for 7920 - Unified Wireless IP Phone VoIP
Page 4: ......