3-5
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Chapter 3 Setting Up the Cisco Unified IP Phone
Understanding the Cisco Unified IP Phones 7906G and 7911G Components
The speaker is enabled by default. You must disable the speaker through the
Cisco Unified Communications Manager Administration application. To do so,
choose
Device > Phone
and locate the phone you want to modify. In the Phone
Configuration web page for the phone, check the
Disable Speakerphone
check
box.
Monitor Mode
In Monitor mode, users can only listen to a call on the speaker. To speak to the
other party on the call, users must pick up the handset.
Monitor mode is enabled by default if the speaker is enabled on Cisco Unified
Communications Manager Administration.
From the phone, users can turn on the Monitor function with the
Monitor
softkey,
and turn off this function with the
MonOff
softkey or by picking up the handset.
Group Listen Mode
In Group Listen mode, both the handset and speaker can be active at the same
time. During a call, one user can talk into the handset while other users can listen
over the speaker.
Enabling Group Listen Mode on Cisco Unified Communications Manager
Group Listen mode is disabled by default. To enable this mode, you must do so
from the Phone Configuration page in Cisco Unified Communications Manager
Administration.
From Cisco Unified Communications Manager Administration, choose
Device >
Phone
and locate the phone you want to modify. In the Phone Configuration web
page for the phone (Product Specific Configuration section), check the
Enable
Group Listen
check box.
If Group Listen mode is enabled, the Monitor feature softkeys are not available on
the phone.
Summary of Contents for 7906G - Unified IP Phone VoIP
Page 4: ......