Cisco 7906G - Unified IP Phone VoIP Administration Manual Download

Page: 105 / 284

4-11

Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0

OL11954-01

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Network Configuration Menu

DNS Server 1

DNS Server 2

DNS Server 3

DNS Server 4

DNS Server 5

Primary Domain Name System (DNS) server
(DNS Server 1) and optional backup DNS
servers (DNS Server 2–5) used by the phone.

Unlock network configuration
options.

Set the DHCP Enabled option
to

Scroll to the appropriate DNS
Server option, press the

Edit

softkey, and then enter a new
DNS server IP address.

Press the

Validate

softkey.

Repeat Steps 3 and 4 as needed
to assign backup DNS servers.

Press the

Save

softkey.

Operational
VLAN ID

Auxiliary Virtual Local Area Network
(VLAN) configured on a Cisco Catalyst
switch in which the phone is a member.

If the phone has not received an auxiliary
VLAN, this option indicates the
Administrative VLAN.

If neither the auxiliary VLAN nor the
Administrative VLAN are configured, this
option is blank.

The phone obtains its Operational
VLAN ID via Cisco Discovery
Protocol (CDP) from the switch to
which the phone is attached. To
assign a VLAN ID manually, use
the Admin. VLAN ID option.

Admin. VLAN
ID

Auxiliary VLAN in which the phone is a
member.

Used only if the phone does not receive an
auxiliary VLAN from the switch, ignored
otherwise.

Unlock network configuration
options.

Scroll to the Admin. VLAN ID
option, press the

Edit

softkey,

and then enter a new Admin
VLAN setting.

Press the

Validate

softkey and

then press the

Save

softkey.

Table 4-2

Network Configuration Menu Options (continued)

Option

Description

To Change

Summary of Contents for 7906G - Unified IP Phone VoIP





























































































































































































































































































Search results

Summary of Contents for 7906G - Unified IP Phone VoIP

Reviews:

Related manuals for 7906G - Unified IP Phone VoIP

Brands by name

Popular brands

Cisco 7906G - Unified IP Phone VoIP, Administration Manual

Search results

Summary of Contents for 7906G - Unified IP Phone VoIP

Reviews:

Related manuals for 7906G - Unified IP Phone VoIP

Brands by name

Popular brands