Cisco 7906G - Unified IP Phone VoIP Administration Manual Download Page 108

Page: 108 / 284

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Network Configuration Menu

4-14

Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0

OL11954-01

Related Topics

•

Displaying a Configuration Menu, page 4-2

•

Unlocking and Locking Options, page 4-4

•

Editing the Values of an Option Setting, page 4-5

•

Overview of Options Configurable from a Phone, page 4-6

PC Port
Configuration
(applies to 7911G
only)

Speed and duplex of the access port (labeled
10/100 PC). Valid values:

•

Auto Negotiate

•

10 Half—10-BaseT/half duplex

•

10 Full—10-BaseT/full duplex

•

100 Half—100-BaseT/half duplex

•

100 Full—100-BaseT/full duplex

If the phone is connected to a switch,
configure the port on the switch to the same
speed/duplex as the phone, or configure both
to auto-negotiate.

If you change the setting of this option, you
must change the SW Port Configuration
option to the same setting.

Unlock network configuration
options.

Scroll to the PC Port
Configuration option and then
press the

Edit

softkey.

Scroll to the setting that you
want and then press the

Select

softkey.

Press the

Save

softkey.

PC VLAN
(applies to 7911G
only)

Allows the phone to work better with
non-Cisco switches. Strips the 802.1P/Q tags
from the packets going to a PC from the
access port on the phone. The Admin. VLAN
ID must be set before you can change this
option.

Unlock network configuration
options.

Make sure the Admin. VLAN
ID option is set.

Scroll to the

PC VLAN

option, press the

Edit

softkey,

and then enter a new PC
VLAN setting.

Press the

Validate

softkey and

then press the

Save

softkey.

Table 4-2

Network Configuration Menu Options (continued)

Option

Description

To Change

Summary of Contents for 7906G - Unified IP Phone VoIP





























































































































































































































































































Search results

Summary of Contents for 7906G - Unified IP Phone VoIP

Reviews:

Related manuals for 7906G - Unified IP Phone VoIP

Brands by name

Popular brands

Cisco 7906G - Unified IP Phone VoIP, Administration Manual

Search results

Summary of Contents for 7906G - Unified IP Phone VoIP

Reviews:

Related manuals for 7906G - Unified IP Phone VoIP

Brands by name

Popular brands