Cisco 7902G - Unified IP Phone VoIP, Administration Manual

Page: 85 / 208

4-9
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Verifying Network Settings
On the Cisco Unified IP Phone 7902G, you can also review phone settings using
the IVR system. For more information, see
Appendix B, “Using the Interactive
Voice Response (IVR) System on the Cisco Unified IP Phone 7902G.”
Using the Phone’s Network Configuration Screen (Cisco Unified IP Phone 7905G and 7912G)
Procedure
Step 1
Display the Network Configuration menu.
For instructions, see the “Displaying the Network Configuration Menu” section
on page 4-5 .
Step 2
Scroll through the options to display the settings described in Table 4-2 .
Table 4-2 Network Settings
Network Setting Description Usage Notes
DHCP Server Displays IP address of the Dynamic
Host Configuration Protocol (DHCP)
server that the phone uses to obtain IP
address. See the “Modifying DHCP
Settings” section on page 4-15 .
BootP Server Indicates whether the phone obtains its
configuration from a Bootstrap Protocol
(BootP) server rather than a DHCP
server. Always displays No .
Cannot be configured.
MAC Address Identifies the unique Media Access
Control (MAC) address of the phone. Cannot configure.
Host Name Identifies the unique host name
assigned to the phone. Obtained from the DHCP
server.
Domain Name Identifies the name of the Domain
Name System (DNS) domain in which
the phone resides. See the “Assigning a Domain
Name” section on page 4-25 .
IP Address Indicates the Internet Protocol (IP)
address of the phone. See the “Assigning an IP
Address” section on page 4-20 .