Cisco 7902G - Unified IP Phone VoIP, Administration Manual

Page: 105 / 208

4-29
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Modifying VLAN Settings
Using the Phone Configuration Web Page (Cisco Unified IP Phone 7902G, 7905G, and 7912G)
Procedure
Step 1
Display the Phone Configuration web page.
For instructions, see the “Accessing Network Settings through a Phone
Configuration Web Page” section on page 4-3 .
Step 2
In the pane on the left under Change Configuration, click Network Parameters .
You may be prompted to enter a password.
The Network Parameters web page appears.
Step 3 In the VLANSetting field, enter a VLAN ID into bits 18–29 and click Apply .
For more information about this field, see the VLANSetting parameter in
Table A-5 on page A-16 .
On the Cisco Unified IP Phone 7902G, you can also review phone settings using
the IVR system. For more information, see
Appendix B, “Using the Interactive
Voice Response (IVR) System on the Cisco Unified IP Phone 7902G.”
Using the Phone’s Network Configuration Screen (Cisco Unified IP Phone 7905G and 7912G)
Procedure
Step 1 Display the Network Configuration menu.
For instructions, see the “Displaying the Network Configuration Menu” section
on page 4-5 .
Step 2 Unlock Network Configuration menu options.
For instructions, see the “Unlocking and Locking Options on the Network
Configuration Menu” section on page 4-6 .
Step 3 Scroll to Admin. VLAN Id .
Step 4
Press the Edit softkey.