A-15
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
Appendix A Additional Configuration Methods and Parameters
Configuration Parameters
Configuration Parameters
This section provides information on the parameters that you can use to configure
the Cisco Unified IP Phone 7902G, 7905G, and 7912G through a profile file or
through a phone’s web page.
Note
On the Cisco Unified IP Phone 7902G, some of these parameters can also be
configured through the IVR. See
Appendix B, “Using the Interactive Voice
Response (IVR) System on the Cisco Unified IP Phone 7902G.”
These parameters are organized into the following categories:
•
Network parameters—Control various network-related activities of the
phone. See the
“Network Parameters” section on page A-15
.
•
Tone parameters—Control how the phone handles the various tones that it
plays, and related options. See the
“Tone Parameters” section on page A-20
.
•
Audio parameters—Control how the phone handles various audio-related
activities. See the
“Audio Parameters” section on page A-20
.
•
Profile file parameters—Parameters that are available only from the phone’s
profile file. See the
“Profile File Parameters” section on page A-22
.
Network Parameters
describes the network parameters that you can configure through a
phone’s profile file or through its Network Parameters web page.
Summary of Contents for 7902G - Unified IP Phone VoIP
Page 4: ......
