Cisco 7902G - Unified IP Phone VoIP, Administration Manual

Page: 59 / 208

2-9
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Determining the MAC Address of a Cisco Unified IP Phone
Determining the MAC Address of a
Cisco Unified IP Phone
There are several procedures that require you to determine and enter the MAC
address of a Cisco Unified IP Phone. These procedures include adding phones the
the Cisco Unified CallManager database using Cisco Unified CallManager
Administration or using BAT.
Table 2-2 describes the methods that you can use to determine the MAC address
of a phone.
Adding Phones to the Cisco Unified CallManager
Database
Before installing the Cisco Unified IP phone, you must choose a method for
adding phones to the Cisco Unified CallManager database. The following
sections describe these methods:
• Adding Phones with Auto-Registration, page 2-10
•
Adding Phones with Auto-Registration and TAPS, page 2-11
Table 2-2 Determining the MAC Address of a Phone
Cisco Unified
IP Phone
Model
Method Reference
7902G Use the Interactive Voice
Response (IVR) system See Appendix A, “Additional
Configuration Methods and
Parameters”
7905G and
7912G Choose Menu > Settings >
Network Configuration and
look at the MAC Address field
See Chapter 4, “Configuring
Network Settings on the
Cisco Unified IP Phone”
All models Display the phone’s web page
and click the
Device
Information hyperlink
See Appendix A, “Additional
Configuration Methods and
Parameters”