Cisco 7902G - Unified IP Phone VoIP, Administration Manual

Page: 158 / 208

Appendix A Additional Configuration Methods and Parameters
Web Page Configuring
A-10
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
Network Configuration
The Network Configuration area of the Cisco Unified IP Phone web page displays
network configuration information and information about other phone settings.
Table A-3 describes these items.
Note
You can obtain and set many of these items from phone itself
(Cisco Unified IP Phone 7905G and 7912G) or from the phone’s IVR system
(Cisco Unified IP Phone 7902G). For more information, see
Chapter 4,
“Configuring Network Settings on the Cisco Unified IP Phone.”
To display the Network Configuration area, perform either of these steps:
•
Access the web page for the phone as described in the “Accessing Network
Settings through a Phone Configuration Web Page” section on page 4-3 and
then click the Network Configuration hyperlink.
•
In a web browser, enter this URL: ip-address /NetworkConfiguration , where
ip-address is the IP address of the phone.
Software version Version of the software running on the phone
Hardware revision Version of the phone hardware
Serial number Serial number of the phone
Product ID Product identifier of the phone
Hardware features Reserved for future use
BTXML cards version Version of the graphics card in the phone
Table A-2 Device Information Area Items (continued)
Item Description
Table A-3 Network Configuration Area Items
Item Description
DHCP server If DHCP is enabled, the DHCP server that the pone
contacts
BOOTP server Not used