A-21
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
Appendix A Additional Configuration Methods and Parameters
Configuration Parameters
Table A-7
Audio Parameters
Parameter
Description
Usage
AudioMode
Allows control of
audio-related functions.
Bit map, as follows:
•
Bit 0—Reserved for future use.
•
Bit 1—If 0, use G.711 codec only; do not use
low-bit-rate codec. If 1, use both G.711 and
low-bit-rate codec.
•
Bits 2–31—Reserved for future use.
ConnectMode
Connection mode of the
protocol used by the
Cisco Unified IP Phone.
Bit map, as follows:
•
Bit 0–29—Reserved for future use. Must be set
to 0.
•
Bit 30—If 1, enable Cisco IOS Telephony
Solution (ITS) support to handle the differences
between Cisco Unified CallManager and Cisco
ITS. Cisco ITS runs on an IOS router and is a
subset of Cisco Unified CallManager. If you
have Cisco ITS, refer to the documentation for
that product.
•
Bit 31—If 1, enable downloading and
processing of .cnf.xml configuration file
information sent by
Cisco Unified CallManager.
Summary of Contents for 7902G - Unified IP Phone VoIP
Page 4: ......
