Cisco 7902G - Unified IP Phone VoIP, Administration Manual

Page: 47 / 208

1-15
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Understanding the Requirements for Installing and Configuring the Cisco Unified IP Phone 7902G, 7905G, and 7912G
3. Decide how you want to add
phones to the
Cisco Unified CallManager
database:
•
With auto-registration
•
With Cisco Unified
CallManager
Administration only
•
With the
Bulk Administration Tool
(BAT) only
• With BAT and the Tool for
Auto-Registered Phones
Support (TAPS)
How you add the phones to
Cisco Unified CallManager
determines how the directory
number is assigned and whether
you need to obtain a MAC address
first, among other things.
•
See the “Adding Phones
to the
Cisco Unified CallMan
ager Database” section
on page 2-9
.
•
Refer to Cisco Unified
CallManager
Administration Guide
.
•
Refer to Cisco Unified
CallManager Bulk
Administration Guide
.
4. Obtain the MAC address from
the IP phone.
Not necessary if you plan to add
phones to the
Cisco Unified CallManager
database using auto-registration
only or in conjunction with the
Tool for Auto-Registered Phones
Support (TAPS). See the “Determining the
MAC Address of a
Cisco Unified IP Phone”
section on page 2-9
.
5. Choose to power through the
Cisco AC adapter or
Cisco Catalyst switch.
Determines whether the phone
receives power from an external
power source over a power cord or
from the in-line power source over
the Ethernet cable.
•
See the “Providing
Power to the
Cisco Unified IP Phone
” section on page 2-7
.
•
Refer to the
documentation included
with the Cisco Catalyst
switch.
6. Install the phone in the network. Adds the phone to the network. See Chapter 3, “Setting Up
the
Cisco Unified IP Phone.”
Table 1-2 Overview of Configuration Procedures for the Cisco Unified IP Phone (continued)
Required Task Purpose For More Information