manualshive.com logo in svg

Cisco 6941 - Unified IP Phone Slimline VoIP, Administration Manual

The Cisco 6941 - Unified IP Phone Slimline VoIP is a cutting-edge communication device offering exceptional call quality. Explore its various features with ease by downloading the comprehensive User Manual from our website for free. Find all the necessary instructions and guidance to maximize the potential of this product at manualshive.com.

Share
Download
background image

 

ix

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

OL-24567-01

Preface

Overview

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified 
Communications Manager 8.6 (SCCP and SIP) 

provides the information you need to understand, install, 

configure, manage, and troubleshoot the phones on a Voice-over-IP (VoIP) network.

Because of the complexity of an IP telephony network, this guide does not provide complete and detailed 
information for procedures that you need to perform in Cisco Unified Communications Manager (Cisco 
Unified CM) or other network devices. See the 

“Obtaining Documentation, Obtaining Support, and 

Security Guidelines” section on page xi

.

Audience

Network engineers, system administrators, or telecom engineers should review this guide to learn the 
steps required to properly set up the Cisco Unified IP Phone on the network.

The tasks described are administration-level tasks and are not intended for end-users of the phones. 
Many of the tasks involve configuring network settings and affect the phone’s ability to function in the 
network.

Because of the close interaction between the Cisco Unified IP Phone and Cisco Unified CM, many of 
the tasks in this manual require familiarity with Cisco Unified CM.

Organization

This manual is organized as follows.

Chapter

Description

Chapter 1, “An Overview of the Cisco 
Unified IP Phone”

Provides a conceptual overview and description of the Cisco 
Unified IP Phone.

Chapter 2, “Preparing to Install the Cisco Unified IP 
Phone on Your Network”

Describes how the Cisco Unified IP Phone interacts with other key 
IP telephony components, and provides an overview of the tasks 
required prior to installation.

Chapter 3, “Setting Up the Cisco Unified IP Phone”

Describes how to install and configure the Cisco Unified IP Phone 
on your network properly and safely.

Summary of Contents for 6941 - Unified IP Phone Slimline VoIP



















































































































































































































Reviews:

No comments

Related manuals for 6941 - Unified IP Phone Slimline VoIP

D-Link DVG-5121SP Quick Information Manual preview
DVG-5121SP
Brand: D-Link Pages: 56
ABRIVO X-EO Quick Reference Manual preview
X-EO
Brand: ABRIVO Pages: 20
Yealink W56B Quick Start Manual preview
W56B
Brand: Yealink Pages: 12
Cricket Icon 2 Quick Start Manual preview
Icon 2
Brand: Cricket Pages: 12
DMP Electronics 265LTE-V Installation Manual preview
265LTE-V
Brand: DMP Electronics Pages: 4
Wiko DARKMOON Quick Manual preview
DARKMOON
Brand: Wiko Pages: 98
mPTech Rumba 2 Manual preview
Rumba 2
Brand: mPTech Pages: 50
Pacific GSM PGM1-3G Instructions Manual preview
PGM1-3G
Brand: Pacific GSM Pages: 8
Samsung SM-J320M/DS User Manual preview
SM-J320M/DS
Brand: Samsung Pages: 37
Geemarc ClearSound CL8400BT Manual preview
ClearSound CL8400BT
Brand: Geemarc Pages: 73
WOO SP5540 User Manual preview
SP5540
Brand: WOO Pages: 11
Zte Blade Apex Quick Start Manual preview
Blade Apex
Brand: Zte Pages: 198
Lava KKT connect User Manual preview
KKT connect
Brand: Lava Pages: 2
Motorola MOTOFONE F3C Manual preview
MOTOFONE F3C
Brand: Motorola Pages: 1
Motorola KRZR K1 Quick Start Manual preview
KRZR K1
Brand: Motorola Pages: 20
Motorola MB861 User Manual preview
MB861
Brand: Motorola Pages: 86
Motorola J2ME User Manual preview
J2ME
Brand: Motorola Pages: 14
Motorola KRZR User Manual preview
KRZR
Brand: Motorola Pages: 103

Brands by name

Popular brands

Load more brands