manualshive.com logo in svg

Cisco 6941 - Unified IP Phone Slimline VoIP, Administration Manual

The Cisco 6941 - Unified IP Phone Slimline VoIP is a cutting-edge communication device offering exceptional call quality. Explore its various features with ease by downloading the comprehensive User Manual from our website for free. Find all the necessary instructions and guidance to maximize the potential of this product at manualshive.com.

Share
Download
background image

 

8-8

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

OL-24567-01

Chapter 

Network Statistics

Network Statistics

The following network statistics hyperlinks on a phone’s web page provide information about network 
traffic on the phone. To display a network statistics area, access the web page for the phone as described 
in the 

“Accessing the Web Page for a Phone” section on page 8-2

.

  •

Ethernet Information—Displays information about Ethernet traffic. 

Table 8-3

 describes the items in 

this area.

  •

Network—Displays information about network traffic to and from the network port (10/100 SW) on 
the phone. 

Table 8-4

 describes the items in this area.

IP Addressing Mode

Displays the IP addressing mode that is available on the phone.

IP Preference Mode Control

Indicates the IP address version that the phone uses during signaling with Cisco Unified 
Communications Manager when both IPv4 and IPv6 are both available on the phone.

IPv6 Auto Configuration

Displays whether the auto configuration is enabled or disabled on the phone.

IPv6 CAPF Server

Common Name (from the Cisco Unified Communications Manager Certificate) of the CAPF 
used by the phone.

DHCPv6

Dynamic Host Configuration Protocol (DHCP) automatically assigns IPv6 address to devices 
when you connect them to the network. Cisco Unified IP Phones enable DHCP by default.

IPv6 Address Released

The phone has been configured to release its IPv6 address.

IPv6 Default Router 1

Default router used by the phone (Default Router 1).

IPv6 Address

IPv6 address of the phone. The IPv6 address is a 128 bit address.

IPv6  Prefix  Length

Subnet prefix length that is used by the phone. The subnet prefix length is a decimal value from 
1-128, that specifies the portion of the IPv6 address that comprises the subnet.

IPv6 DNS Server 1

Primary Domain Name System (DNS) server (DNS Server 1) used by the phone.

IPv6 Alternate TFTP

Indicates whether the phone is using the IPv6 Alternate TFTP server.

IPv6 TFTP Server 1

Primary IPv6 Trivial File Transfer Protocol (TFTP) server used by the phone.

IPv6 TFTP Server 2

Optional backup IPv6 TFTP server that the phone uses if the primary IPv6 TFTP server is 
unavailable.

Table 8-2

Network Setup Area Items (continued)

Item

Description

Table 8-3

Ethernet Information Items 

Item

Description

Tx Frames

Total number of packets transmitted by the phone

Tx broadcast

Total number of broadcast packets transmitted by the phone

Tx unicast

Total number of unicast packets transmitted by the phone

Rx Frames

Total number of packets received by the phone

Rx broadcast

Total number of broadcast packets received by the phone

Rx unicast

Total number of unicast packets received by the phone

Summary of Contents for 6941 - Unified IP Phone Slimline VoIP



















































































































































































































Reviews:

No comments

Related manuals for 6941 - Unified IP Phone Slimline VoIP

Audiovox CDM-8425PTT User Manual preview
CDM-8425PTT
Brand: Audiovox Pages: 79
Aastra 6725ip Quick Start Manual preview
6725ip
Brand: Aastra Pages: 9
QUO INFINITY PQ5 User Manual preview
INFINITY PQ5
Brand: QUO Pages: 5
Alcatel ZIP LTE User Manual preview
ZIP LTE
Brand: Alcatel Pages: 53
Hanlong UC860 User Manual preview
UC860
Brand: Hanlong Pages: 68
Konrow CITY5 User Manual preview
CITY5
Brand: Konrow Pages: 17
Aastra Dialog 4422 User Manual preview
Dialog 4422
Brand: Aastra Pages: 117
ADTRAN Aastra 9133i IP User Manual preview
Aastra 9133i IP
Brand: ADTRAN Pages: 31
MYTOUCH T-MOBILE Q Start Manual preview
T-MOBILE Q
Brand: MYTOUCH Pages: 25
Nokia 3361 - Cell Phone - AMPS User Manual preview
3361 - Cell Phone - AMPS
Brand: Nokia Pages: 174
Haier Muzik V70 User Manual preview
Muzik V70
Brand: Haier Pages: 32
Honeywell LTE-IV Quick Installation Manual preview
LTE-IV
Brand: Honeywell Pages: 2
Honeywell KHF 1050 Pilot'S Manual preview
KHF 1050
Brand: Honeywell Pages: 33
Honeywell HWF2A-COM Installation And Setup Manual preview
HWF2A-COM
Brand: Honeywell Pages: 28
Honeywell V32/iGSMKT Quick Start Manual preview
V32/iGSMKT
Brand: Honeywell Pages: 2
Honeywell LTE-X series Installation And Setup Manual preview
LTE-X series
Brand: Honeywell Pages: 24
Honeywell IPGSM-4GC Installation And Setup Manual preview
IPGSM-4GC
Brand: Honeywell Pages: 24
Honeywell GSMX4G Installation And Setup Manual preview
GSMX4G
Brand: Honeywell Pages: 40

Brands by name

Popular brands

Load more brands