manualshive.com logo in svg

Cisco 6941 - Unified IP Phone Slimline VoIP, Administration Manual

The Cisco 6941 - Unified IP Phone Slimline VoIP is a cutting-edge communication device offering exceptional call quality. Explore its various features with ease by downloading the comprehensive User Manual from our website for free. Find all the necessary instructions and guidance to maximize the potential of this product at manualshive.com.

Share
Download
background image

 

4-4

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

OL-24567-01

Chapter 

Network Setup Menu

  •

Unlocking and Locking Options, page 4-3

  •

Network Setup Menu, page 4-4

Network Setup Menu

The Network Setup menu provides options for viewing and making a variety of network settings. 

Table 4-1

 describes these options and, where applicable, explains how to change them.

For information about how to access the Network Setup menu, see the 

“Displaying a Configuration 

Menu” section on page 4-2

.

For information about the keys you can use to edit options, see the 

“Editing Values” section on page 4-3

.

Table 4-1

Network Setup Menu Options 

Option

Description

To Change

IPv4 Setup

In the IPv4 Setup submenu, you can do the following: 

  •

Enable or disable the phone to use the IP address that 
is assign by the DHCP server.

  •

Manually set the IP Address, Subnet Mask, Default 
Routers, DNS Server, and Alternate TFTP servers.

For more information on the IPv4 address fields, refer to 

Table 4-2

. 

Scroll to IPv4 Setup and press 

Select

.

IPv6 Setup

In the IPv6 Setup submenu, you can do the following: 

  •

Enable or disable the phone to use the IPv6 address 
that is assign by the DHCPv6 server.

  •

Manually set the IPv6 Address, Subnet Prefix Length, 
IPv6 DNS Server, and IPv6 TFTP Servers.

For more information on the IPv6 address fields, refer to 

Table 4-3

. 

Scroll to IPv6 Setup and press 

Select

.

Host Name

Unique host name that the DHCP server assigned to the 
phone. 

Display only—Cannot configure.

Domain Name

Name of the Domain Name System (DNS) domain in 
which the phone resides.

1.

Set the DHCP Enabled option to 

No

.

2.

Scroll to the Domain Name 
option, press the 

Edit

 softkey, 

and then enter a new domain 
name.

3.

Press the 

Apply

 softkey, then 

press 

Save

.

Summary of Contents for 6941 - Unified IP Phone Slimline VoIP



















































































































































































































Reviews:

No comments

Related manuals for 6941 - Unified IP Phone Slimline VoIP

Fairphone faiphone 2 User Manual preview
faiphone 2
Brand: Fairphone Pages: 22
i.safe MOBILE IS330.1 Quick Start Manual preview
IS330.1
Brand: i.safe MOBILE Pages: 21
Samsung SCH-R390X User Manual preview
SCH-R390X
Brand: Samsung Pages: 123
Samsung SGH-I667 User Manual preview
SGH-I667
Brand: Samsung Pages: 167
Telesis ITS821 Installation And User Manual preview
ITS821
Brand: Telesis Pages: 11
ATCOM Rainbow4 Quick Start Manual preview
Rainbow4
Brand: ATCOM Pages: 9
Fisher-Rosemount HART 275 Product Manual preview
HART 275
Brand: Fisher-Rosemount Pages: 116
Yezz ART 1 PRO User Manual preview
ART 1 PRO
Brand: Yezz Pages: 23
iSwag JOURNEY IS-Q3100 User Manual preview
JOURNEY IS-Q3100
Brand: iSwag Pages: 42
TIPTEL Ergophone 6010 User Manual preview
Ergophone 6010
Brand: TIPTEL Pages: 56
Ipevo S0-10 Specifications preview
S0-10
Brand: Ipevo Pages: 2
Wileyfox Swift 2X User Manual preview
Swift 2X
Brand: Wileyfox Pages: 58
Sony Ericsson T292a Owner'S Manual preview
T292a
Brand: Sony Ericsson Pages: 87
Geemarc CL8500 User Manual preview
CL8500
Brand: Geemarc Pages: 70
Geemarc CL8360 User Manual preview
CL8360
Brand: Geemarc Pages: 76
Zte Z353VL User Manual preview
Z353VL
Brand: Zte Pages: 157
Geemarc CLEARSOUND GSMCL8200 Manual preview
CLEARSOUND GSMCL8200
Brand: Geemarc Pages: 110
i.safe MOBILE innovation 2.0 Quick Start Manual preview
innovation 2.0
Brand: i.safe MOBILE Pages: 56

Brands by name

Popular brands

Load more brands