Cisco 6941 - Unified IP Phone Slimline VoIP Administration Manual Download | Manualshive

Page: 144 / 210

background image

8-10

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

OL-24567-01

Chapter

Device Logs

Device Logs

The following device logs hyperlinks on a phone’s web page provide information you can use to help
monitor and troubleshoot the phone. To access a device log area, access the web page for the phone as
described in the

“Accessing the Web Page for a Phone” section on page 8-2

.

•

Console Logs—Includes hyperlinks to individual log files. The console log files include debug and
error messages received on the phone.

•

Core Dumps—Includes hyperlinks to individual dump files. The core dump files include data from
a phone crash.

•

Status Messages—Displays up to the 10 most recent status messages that the phone has generated
since it was last powered up. You can also see this information from the Status Messages screen on
the phone.

Table 7-2

describes the status messages that can appear.

•

Debug Display—Displays debug messages that might be useful to Cisco TAC if you require
assistance with troubleshooting.

•

Restart Cause—Displays the cause for the restart.

Streaming Statistics

A Cisco Unified IP Phone can stream information to and from up to three devices simultaneously. A
phone streams information when it is on a a call or running a service that sends or receives audio or data.

The streaming statistics areas on a phone’s web page provide information about the streams. Cisco
Unified IP Phones 6900 Series use only Stream 1.

To display a Streaming Statistics area, access the web page for the phone as described in the

“Accessing

the Web Page for a Phone” section on page 8-2

, and then click the

Stream 1

hyperlink.

Table 8-5

describes the items in the Streaming Statistics areas.

Table 8-5

Streaming Statistics Area Items

Item

Description

Remote Address

IP address and UDP port of the destination of the stream.

Local Address

IP address and UPD port of the phone.

Start Time

Internal time stamp indicating when Cisco Unified Communications Manager requested
that the phone start transmitting packets.

Stream Status

Indication of whether streaming is active or not.

Host Name

Unique, fixed name that is automatically assigned to the phone based on its MAC address.

Sender Packets

Total number of RTP data packets transmitted by the phone since starting this connection.
The value is 0 if the connection is set to receive only mode.

Sender Octets

Total number of payload octets transmitted in RTP data packets by the phone since starting
this connection. The value is 0 if the connection is set to receive only mode.

Sender Codec

Type of audio encoding used for the transmitted stream.

Sender Reports Sent

1

Number of times the RTCP Sender Report have been sent.

Sender Report Time Sent

1

Internal time stamp indication when the last RTCP Sender Report was sent.

«
...
142
143
144
145
146
...
»

Summary of Contents for 6941 - Unified IP Phone Slimline VoIP



















































































































































































































Reviews:

No comments

Related manuals for 6941 - Unified IP Phone Slimline VoIP

Dialog 4422 IP Office

Brand: Aastra Pages: 151

Brand: Aastra Pages: 2

Dialog 4420 IP Basic

Brand: Aastra Pages: 74

Brand: Aastra Pages: 101

Clearspan 6739i

Brand: Aastra Pages: 9

Clearspan 6739i

Brand: Aastra Pages: 8

Clearspan 6739i

Brand: Aastra Pages: 20

Brand: Aastra Pages: 104

Brand: Aastra Pages: 108

Clearspan 6731i

Brand: Aastra Pages: 2

Brand: Aastra Pages: 7

Brand: Aastra Pages: 1140

Brand: Aastra Pages: 174

Brand: Aastra Pages: 888

Dialog 5446 IP Premium

Brand: Aastra Pages: 87

Brand: Azumi Pages: 31

Brand: Sony Ericsson Pages: 8

Brand: Blackberry Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands