manualshive.com logo in svg

Cisco 6941 - Unified IP Phone Slimline VoIP, Administration Manual

The Cisco 6941 - Unified IP Phone Slimline VoIP is a cutting-edge communication device offering exceptional call quality. Explore its various features with ease by downloading the comprehensive User Manual from our website for free. Find all the necessary instructions and guidance to maximize the potential of this product at manualshive.com.

Share
Download
background image

 

F-3

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

OL-24567-01

Appendix 

ADA Non-Lockable Wall Mount Kit for 6900 Series

  •

One phone bracket

  •

One wall bracket

  •

Four #8-18 x 1.25-inch Phillips-head screws with four anchors

  •

Two M2.5 x 6 mm machine screws

  •

One 6-inch Ethernet cable

Before You Begin

You need these tools to install the bracket:

  •

#1 and #2 Phillips-head screwdrivers

  •

Level

  •

Pencil

You must also install an Ethernet jack for the telephone in the desired location if an Ethernet jack does 
not currently exist. This jack must be wired appropriately for an Ethernet connection. You cannot use a 
regular telephone jack. For more information about phone installation requirements and warnings, see 

Setting Up the Cisco Unified IP Phone, page 3-1

.

Install Non-Lockable Wall Mount Kit for Phone

Step 1

Mount the wall bracket in the desired location. You can install the bracket over an Ethernet jack, or you 
can run the Ethernet network cable to a jack nearby.

a.

Hold the bracket on the wall, placing it so that the arrow on the back of the bracket is pointing up.

b.

Use the level to ensure the bracket is level and use a pencil to mark the screw holes.

c.

Use a #2 Phillips-head screwdriver to carefully center the anchor over the pencil mark and press the 
anchor into the wall.

d.

Screw the anchor clockwise into the wall until it is seated flush.

e.

Use the included screws and a #2 Phillips-head screwdriver to attach the bracket to the wall.

The following figure shows the steps to mount the wall bracket.

Summary of Contents for 6941 - Unified IP Phone Slimline VoIP



















































































































































































































Reviews:

No comments

Related manuals for 6941 - Unified IP Phone Slimline VoIP

Yealink T58W Pro Quick Reference Manual preview
T58W Pro
Brand: Yealink Pages: 2
KALLIOPE PBX LITE Quick Start Manual preview
LITE
Brand: KALLIOPE PBX Pages: 2
M2M Easy 2 Installation Manual preview
Easy 2
Brand: M2M Pages: 88
Unify OpenStage M3 Plus User Manual preview
OpenStage M3 Plus
Brand: Unify Pages: 89
Grandstream Networks GXV3240D Administration Manual preview
GXV3240D
Brand: Grandstream Networks Pages: 84
ZTE-G R237m User Manual preview
R237m
Brand: ZTE-G Pages: 51
T-Mobile G2x Start Manual preview
G2x
Brand: T-Mobile Pages: 25
Sangoma s705 Quick Start Manual preview
s705
Brand: Sangoma Pages: 9
Radio Shack Emergency Phone Dialer Owner'S Manual preview
Emergency Phone Dialer
Brand: Radio Shack Pages: 20
Nortel M5208 Meridian User Manual preview
M5208 Meridian
Brand: Nortel Pages: 20
Ipevo S0-10 Specifications preview
S0-10
Brand: Ipevo Pages: 2
Centrality PA168S User Manual preview
PA168S
Brand: Centrality Pages: 59
Olympia 9211 IP User Manual preview
9211 IP
Brand: Olympia Pages: 31
Grandstream Networks GXP21 Series User Manual preview
GXP21 Series
Brand: Grandstream Networks Pages: 42
AdvanceTC XPLORE X7 Quick Start Manual preview
XPLORE X7
Brand: AdvanceTC Pages: 18
Zte blade V8 PRO User Manual preview
blade V8 PRO
Brand: Zte Pages: 174
Splicecom PCS 580G User Manual preview
PCS 580G
Brand: Splicecom Pages: 70
US Robotics R24.0610.00 Quick Installation Manual preview
R24.0610.00
Brand: US Robotics Pages: 192

Brands by name

Popular brands

Load more brands