4-9
Cisco 600 Series Installation and Operation Guide
78-11190-01
Chapter 4
Configuration Procedures for the Cisco 633
Save Configuration Changes
Use the
set
password
command to change both the enable and exec passwords as
in the following:
Step 1
To change the password enter:
cbos#
set password
mode new password
Example:
set password enable 33Low44PassMe
Step 2
To save your changes, enter:
cbos#
write
Step 3
To exit the CBOS, enter:
cbos#
quit
Save Configuration Changes
Use the
write
command to save any changes you have made during provisioning
to the NVRAM configuration file:
cpe627#
write
Caution
If you do not use the
write
command after changes, all the changes
you made during your current session will be lost when you reboot
the Cisco 633.