5-25
Cisco 600 Series Installation and Operation Guide
78-11190-01
Chapter 5
Configuration Procedures for the Cisco 67x CPE Devices
Configure Applications
Using Telnet to Connect to the Cisco 67x
Use the
telnet
daemon to connect to CBOS and configure and operate the
Cisco 67x.
Note
You must have an
exec
password set to make a Telnet connection to
the Cisco 67x.
Connecting from a Windows NT 4.0 or Windows 95/98 Machine
Step 1
Click
Start
.
Step 2
Select the
Run...
option.
Step 3
When the Run box appears, enter
telnet
in the space provided.
Step 4
Click
OK
. The Connect menu appears.
Step 5
Select the
Remote System...
option from the Connect menu. The screen shown in
Figure 5-1 appears.
Figure 5-1
Remote System List Box
Step 6
Enter the IP address of the Cisco 67x in the
Host Name
box and click
Connect
.
The system then initiates a session with the Cisco 67x. Press the
Enter
key three
or four times to establish a connection.
Step 7
Provide the
exec
user password information. After the system authenticates your
password, you have access to CBOS.
