C H A P T E R
5-1
Cisco Wide Area Virtualization Engine 594 and 694 Hardware Installation Guide
OL-24619-02
5
WAVE Interface Modules
This chapter describes Cisco WAVE Interface Modules and contains the following sections:
•
Interface Module Descriptions, page 5-1
•
Ports and LED Indicators, page 5-5
•
Network Adapter Cabling Requirements, page 5-8
•
Installation Scenarios and Cabling Examples for Fast Ethernet Connections, page 5-10
For information on installing an inline adapter in your WAVE-594 and WAVE-694, see the
“Installing a
Cisco WAVE Interface Module” section on page 4-1
.
For adapter specifications, see
Table A-2
in Appendix A.
Interface Module Descriptions
The WAVE appliance supports one optional 4-port Copper Gigabit Ethernet Interface Module, 8-port
Copper Gigabit Ethernet Interface Module, 4-port Fiber Optic Gigabit Ethernet Interface Module, or
2-port SFP+ Fiber Optic 10 Gigabit Ethernet Interface Module.
This section contains the following topics:
•
Gigabit Ethernet Interface Module—Copper
•
Gigabit Ethernet Interface Module—Fiber Optic
•
10 Gigabit Ethernet Interface Module—Fiber Optic SFP+
•
Inline Interface
Gigabit Ethernet Interface Module—Copper
The copper Gigabit Ethernet Interface Module is available in 4 or 8 ports. Both models support bypass.
(See
Figure 5-1
and
Figure 5-2
.)