3-34
Cisco Wireless LAN Controller Configuration Guide
OL-9141-03
Chapter 3 Configuring Ports and Interfaces
Enabling Link Aggregation
Using the GUI to Enable Link Aggregation
Follow these steps to enable LAG on your controller using the GUI.
Step 1
Click
Controller
>
General
to access the General page (see
Figure 3-13
).
Figure 3-13
General Page
Step 2
Set the LAG Mode on Next Reboot parameter to
Enabled
.
Note
Choose
Disabled
if you want to disable LAG. LAG is disabled by default on the Cisco 4400
series controllers but enabled by default on the Cisco WiSM.
Step 3
Click
Apply
to commit your changes.
Step 4
Click
Save Configuration
to save your changes.
Step 5
Reboot the controller.
Step 6
Assign the WLAN to the appropriate VLAN.
